Home About Us Product Quality Control Contact Us Site Map Managing team    
                     
  Wrapped V-Belt Cogged V-Belt Poly V-Belt   Banded V-Belt   Agricultural V-Belt  
  Dubble V-Belt Industrial VS Belt        Industrial Timing   Conveyor Belt   Automotive Timing  
                     
Banded V-Belt
                   
Pitch Distance             Top Width (Tw)
    Th
    Ø
      Angle
Production Top Width Thickness Anglr Length Conversion Length Range Length Range Length
Type (mm.) (mm.) ( Ø ) (mm.) (Inch) (mm.) Mark
AJ 13.6 15.6 40o Li = La - 63 47" -  197" 1200 -  5000 Li
BJ 17.0 19.0 40o Li = La - 82 47" -  394" 1200 -  10000 Li
CJ 22.4 25.5 40o Li = La - 100 71" -  394" 1800 -  10000 Li
DJ 32.8 37.0 40o Li = La - 135 177" -  590" 4500 -  15000 Li
Banded Wedge V-Belt              
3V (9J) 9.7 9.7 40o La = Li - 63 47" -  197" 1200 -  5000 La
5V (15J) 15.7 15.7 40o La = Li - 98 59" -  394" 1500 -  10000 La
8V (25J) 25.4 25.4 40o La = Li - 157 79" -  394" 2000 - 10000 La
SPZ 10.5 10.0 40o La = Li - 63 47" -  197" 1200 - 5000 La
SPA 13.6 12.3 40o La = Li - 78 47" -  197" 1200 - 5000 La
SPB 17.0 16.5 40o La = Li - 105 59" -  394" 1500 - 10000 La
SPC 22.0 21.0 40o La = Li - 132 118" -  492" 3000 - 12500 La
                     
           Fetures For Classical RE.
       
           Fetures For Wedge RE.
         
Banded classical V-belts are composed of multiple classical V-belts Banded wadge V-belts are composed of multiple narrow  
which are connected into a whole.They effectively solve problems V-belts which are connected into a whole.They effectively  
such as wobbling,smacking and turning over occurred in single solve problems such as wobbling,smacking and turning  
belt operation while ensuring equal stress of each belt and large over occurred in single belt operation while ensuring equal   
conveying load       stress of each belt and large conveying load    
        Marking
       
        Marking
         
The marking of banded classical V-belts stipulates model type, The marking of banded wadge V-belts stipulates model type,  
banding number and length with factory mark in sequence. banding number and length with factory mark in sequence.  
V-belts of these types are marked according to the inside length V-belts of these types are marked according to the inside length  
of factory V-belts.The length conversion table is available for of factory.V-belt.Specific noting should be made on order list  
conversion between various models.
        if the customer has special requirements. The lenfth conversion  
           Example Of Mark    
table is available for conversion between various models.
         
BJ    3X    1970 Li                Example Of Mark      
    Inside length is 1970 mm. SPB    3X    4000 La      
    3 Sets         Outside length is 4000 mm.  
    BJ type         3 Sets      
              SPB Banded type    
Copyright ? 2009 DE.Brother Co.,Ltd. All Rights Reserved